ROUND Pools Ambassador Specifications download pdf (Page 18)

3 LAYERS

OF TAPE

CLOTH TAPE

OR DUCT TAPE

VIEW FROM

INSIDE OF POOL

WALL

SEAM

SKIMMER

INLET FITTING

SKIMMER

RETURN FITTING

3 LAYERS

OF TAPE

INSIDE OF

POOL VIEW

WALL

SEAM

EXTENDED

END OF WALL

PROTECT YOUR LINER

to bottom of wall. If the filter inlet and outlet are not

used, cover over the pre-scored areas on the inside

of the pool wall with 1 layer of tape.

If your Pool Wall has the

Recessed Posi-Lock System an

additional layer of tape should

be added to the inside part of the

extended end of the wall.

INSIDE OF

Cloth tape or duct tape is

POOL VIEW

Once the wall is closed and screws and nuts are tight-

available through your local

ened securely, cover the screw heads on the inside of

pool dealer or hardware

store.

the pool with 3 layers of cloth tape all the way from top

RECHECKING YOUR WORK

Measure from the last

VIEWED FROM

POOL WALL

strap to the outer end

of the pool.

Measurements in both ends

should be equal. Also make

sure that the sides of the

pool between the straps

are straight.

Confirm that the strap

assemblies are "square"

by measuring diagonally

across from the first strap

to the last strap.

Make sure that the Support

Posts on each side of the pool

are lined up in a straight row.

Also, the measurements from the center of one strap to the center of the next one should be 48".

ABOVE

48”

FILLING THE TRENCHES

Fill the trenches and all open areas in

and around the Bottom Supports with

screened damp earth or pre-washed sand.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Comments to this Manuals

No comments

ROUND Pools Ambassador Specifications Page 18

Comments to this Manuals

Related products and manuals for Above ground pools ROUND Pools Ambassador